RevMax 68RFE-302 Bonded Separator Plate

The RevMax 68RFE-302 Bonded Separator Plate can be used on your 2007.5-2011 Dodge 6.7L Diesel 68RFE (For Use With White Solenoid Pack) whether it's stock or has increased line pressure. For stock applications overlay the stock separator plate over the new plate and drill 2- 7/64" holes in the passageway. For heavy-duty applications, the customer must have aftermarket transmission tuning software that is programmed to command higher than stock pressures. Without the tuning software, this modification will not provide any additional line pressure increase. It is suggested that this is done unless you have transmission tuning. If you have a line pressure booster installed, use the stock application option. Drill 1- 1/8" hole into the lower valve body casting all the way thru as shown below. There are two versions of 45RFE/545RFE/66RFE/68RFE valve bodies. The early version uses 7 checkballs and has a white solenoid pack case connector. 

Features

• Quality Construction
• For Stock & Performance Applications