Fleece Freedom Series SAE30 Break-In Oil FPE-FDBRKQT
Fleece Freedom Series SAE30 Break-In Oil FPE-FDBRKQT
Regular price
$56.37 USD
Regular price
Sale price
$56.37 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
Description
The Fleece FPE-FDBRKQT Freedom Series SAE30 Break-In Oil is designed to break in high-performance and racing engines. Freedom Series Break-In Oil delivers maximum compression, horsepower and torque by providing quick and efficient piston ring seating in new and rebuilt high-performance and racing engines. It is formulated with zinc and phosphorus anti-wear additives to protect cam lobes, lifters and rockers during the critical break-in period when wear rates are highest. Its increased film strength also protects rods and main bearings from damage.
Quickly Seats RingsThe primary goal during engine break-in is to seat the rings against the cylinder wall. Properly seated rings increase compression, resulting in maximum horsepower; they reduce oil consumption and prevent hot combustion gases from entering the crankcase. To achieve this, the oil must allow the correct level of controlled wear to occur between the cylinder wall/ring interface while maintaining wear protection on other critical engine parts. Insufficient break-in leaves behind peaks on the cylinder wall that prevent the rings from seating. The deeper valleys, meanwhile, allow excess oil to collect and burn during combustion, increasing oil consumption. Too much wear results in cylinder glazing due to peaks rolling over into the valleys and preventing oil from collecting and adequately lubricating the cylinder wall. Freedom Series Break-In Oil's friction-modifier-free formula allows the sharp peaks on newly honed cylinder walls to partially flatten. The result produces more surface area for rings to seat against, allowing the formation of a dynamic seal that increases compression, horsepower and torque.
Protects Critical Parts from WearNew flat-tappet camshafts and lifters are not seasoned or broken in and must be heat-cycled to achieve proper hardness. During the break-in period, these components are susceptible to accelerated wear because they are splash lubricated, unlike other areas of the engine that are pressure lubricated. Freedom Series Break-In Oil contains high levels of zinc and phosphorus (ZDDP) additives designed to provide the anti-wear protection required during this critical period.
Increased Film StrengthHigh-performance and racing engines often use aftermarket parts designed to increase torque and horsepower. The added stress can rupture the oil film responsible for preventing harmful metal-to-metal contact on rod and main bearings. The base oils in Freedom Series Break-In Oil provide increased film strength to protect bearings from wear.
Applications Freedom Series Break-In Oil is designed to effectively break in Freedom Racing Engines and other high-performance and racing engines, helping maximize compression, horsepower and torque.
Product Warranty Using AMSOIL synthetic lubricants or practicing extended drain intervals does not void your new vehicle or equipment manufacturer's warranty.
Compatibility Freedom Series Synthetic Diesel Oil is compatible with other conventional and synthetic engine oils. Mixing AMSOIL diesel oil with other oils, however, will reduce its performance benefits. Aftermarket oil additives are not recommended for use with AMSOIL synthetic diesel oils.
Health & Safety This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Safety Data Sheet (SDS).
Recommendations Follow the engine-builder or manufacturer break-in recommendations if available. For all other applications, the break-in period should not exceed 1,000 miles (1,600 km). After completing break in, drain and fill the engine with a high-performance AMSOIL synthetic oil that meets builder or manufacturer specifications, such as Freedom Series Synthetic Diesel Oil.
Quickly Seats RingsThe primary goal during engine break-in is to seat the rings against the cylinder wall. Properly seated rings increase compression, resulting in maximum horsepower; they reduce oil consumption and prevent hot combustion gases from entering the crankcase. To achieve this, the oil must allow the correct level of controlled wear to occur between the cylinder wall/ring interface while maintaining wear protection on other critical engine parts. Insufficient break-in leaves behind peaks on the cylinder wall that prevent the rings from seating. The deeper valleys, meanwhile, allow excess oil to collect and burn during combustion, increasing oil consumption. Too much wear results in cylinder glazing due to peaks rolling over into the valleys and preventing oil from collecting and adequately lubricating the cylinder wall. Freedom Series Break-In Oil's friction-modifier-free formula allows the sharp peaks on newly honed cylinder walls to partially flatten. The result produces more surface area for rings to seat against, allowing the formation of a dynamic seal that increases compression, horsepower and torque.
Protects Critical Parts from WearNew flat-tappet camshafts and lifters are not seasoned or broken in and must be heat-cycled to achieve proper hardness. During the break-in period, these components are susceptible to accelerated wear because they are splash lubricated, unlike other areas of the engine that are pressure lubricated. Freedom Series Break-In Oil contains high levels of zinc and phosphorus (ZDDP) additives designed to provide the anti-wear protection required during this critical period.
Increased Film StrengthHigh-performance and racing engines often use aftermarket parts designed to increase torque and horsepower. The added stress can rupture the oil film responsible for preventing harmful metal-to-metal contact on rod and main bearings. The base oils in Freedom Series Break-In Oil provide increased film strength to protect bearings from wear.
Applications Freedom Series Break-In Oil is designed to effectively break in Freedom Racing Engines and other high-performance and racing engines, helping maximize compression, horsepower and torque.
Product Warranty Using AMSOIL synthetic lubricants or practicing extended drain intervals does not void your new vehicle or equipment manufacturer's warranty.
Compatibility Freedom Series Synthetic Diesel Oil is compatible with other conventional and synthetic engine oils. Mixing AMSOIL diesel oil with other oils, however, will reduce its performance benefits. Aftermarket oil additives are not recommended for use with AMSOIL synthetic diesel oils.
Health & Safety This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Safety Data Sheet (SDS).
Recommendations Follow the engine-builder or manufacturer break-in recommendations if available. For all other applications, the break-in period should not exceed 1,000 miles (1,600 km). After completing break in, drain and fill the engine with a high-performance AMSOIL synthetic oil that meets builder or manufacturer specifications, such as Freedom Series Synthetic Diesel Oil.
Features
- 1 U.S. Quart (946mL)
- Quickly Seats Rings
- Protects against wear
- Contains no friction modifiers
- Maximizes compression and power
Manufacturer Warranty*
Limited
Limited
